Kicker steering hydraulic tie in

[salmonkiller01]

I have my mains (twin 150s) tied together and now I want to add steering to my kicker
I have a cylinder for it a liquid tie bar valve.

I want all three engine to turn when trolling but the kicker stationary when running.
Do I just use a liquid tie bar and turn on off or do I need more valves.
Is the diagram correct? Assuming one cylinder on main one on kicker
I should add that the mercury kickers have trim limiting strap so it can not turn when trimmed up

 

[profisher]

All the liquid valve does is add your kicker to the system when in the on position and eliminate it when off. So your mains will be come off the valve on one line which is always live so to speak and your kicker on a separate one that is live when the valve opens that line as well.

 

[salmonkiller01]

All the liquid valve does is add your kicker to the system when in the on position and eliminate it when off. So your mains will be come off the valve on one line which is always live so to speak and your kicker on a separate one that is live when the valve opens that line as well.

The diagram is how it should be then

 

[ship happens]

 

[salmonkiller01]

Thanks for the confirmation ship and profisher

 

[ship happens]

No need for a union though. But use what you got