MRWood
Well-Known Member
Just discovered that I have water in my oil. Motor was running rough and wouldn't get up on plane the last time out. I figured out that i had moisture feeding into my carb from the pcv hoses. Took off the valve covers and they were coated in white creamy gunk. I am suspecting that the water may have come from a raw water hose that had started leaking water without me knowing (this happened the prior trip). Water must have been spraying and I suspect got sucked into the intake/carb (not certain of this though). I don't think it's due to a cracked block because my coolant level is still where it should be. I have cleaned out the valve covers and valves etc. I have drained the oil, which was all creamy. I am now wondering if I should run some motor flush of some sort through the motor and then rechange the oil and filter again. Any advice would be appreciated.