New rollers

[reb]

I am replacing the rollers on the trailer with hull sav'r brand. Package comes with 4 "c" clips to hold rollers in place against washer. Need to find more of these "c" clips.
Does anyone know what these are called or can be purchased?

 

[spring fever]

Does the spindle the rollers slide on have a hole through it? If it does I use stainless cotter pins or tractor clips against the washer. If it doesn't -the steel is very mild and can be easily drilled with a hand drill to accept the 2 aforementioned pins.

 

[Hoochiebob]

They are called hog rings (or bullrings). Most marine stores should carry them. Pretty commonly replaced part. Where are you located?

 

[reb]

Thanks guys.
Yes drilling through and codders pins are my next thought if I cant find them.
Located in maple ridge/tri cities

 

[spring fever]

Thanks guys.
Yes drilling through and codders pins are my next thought if I cant find them.
Located in maple ridge/tri cities

I used to use the tap on caps but in the end they always rust and leave you very susceptible to roller loss and the ensuing major hull damage. Much the same as these bull clips. Stainless Cotter pins are forever-no roller loss!!

 

[reb]

Sounds good. Thanks guys.