Boats on Used Victoria and Other Areas

[Stizzla]

My honest power length to horsie formula:

17’ min 90 and 115 ideally
18.5’ min 115 and 150 ideally
20-21’ min 175 and 200 ideally
23’ 225 min and 250 ideally or twin 150’s
25-26’ min 300 and ideally 350 or twin 200’s.

Edit: adding a pod with flotation adds one power level higher than “ideal.” There are always minor exceptions ie a heavy Grady could use one more than shown and a light tinny could be great with “min”
Print this up and put it on your refrigerator!

 

[Gallivanter]

My honest power length to horsie formula:

17’ min 90 and 115 ideally
18.5’ min 115 and 150 ideally
20-21’ min 175 and 200 ideally
23’ 225 min and 250 ideally or twin 150’s
25-26’ min 300 and ideally 350 or twin 200’s.

Edit: adding a pod with flotation adds one power level higher than “ideal.” There are always minor exceptions ie a heavy Grady could use one more than shown and a light tinny could be great with “min”
Pin this and put it on your refrigerator!

According to your chart I got it right, a 22’ tinny with a Zuke 200.

 

[Stizzla]

Yep. Solid

 

[Gallivanter]

According to your chart I got it right, a 22’ tinny with a Zuke 200.

Our old Raider work boat is an 18’ with 115 Yammi, so your 2 for 2 in my books!

 

[Eden Island]

My honest power length to horsie formula:

17’ min 90 and 115 ideally
18.5’ min 115 and 150 ideally
20-21’ min 175 and 200 ideally
23’ 225 min and 250 ideally or twin 150’s
25-26’ min 300 and ideally 350 or twin 200’s.

Edit: adding a pod with flotation adds one power level higher than “ideal.” There are always minor exceptions ie a heavy Grady could use one more than shown and a light tinny could be great with “min”
Print this up and put it on your refrigerator!

That looks about right for gas powered outboards. Looking at diesel, torque matters more than horsepower - my D3 - 200 performs at least as well as the original 260 hp gas I/O in a 23 Hourston that weighs ~6500 lbs.

 

[Gallivanter]

Yep. Solid

That bed frame in your pic looks a little underpowered though, it’s not on plane

 

[Stizzla]

That bed frame in your pic looks a little underpowered though, it’s not on plane

Gets me from a-b. Never even considered going to C tho

 

[ship happens]

That looks about right for gas powered outboards. Looking at diesel, torque matters more than horsepower - my D3 - 200 performs at least as well as the original 260 hp gas I/O in a 23 Hourston that weighs ~6500 lbs.

This is when prop size and pitch and basically surface area of blade comes to the table

 

[kaelc]

My honest power length to horsie formula:

17’ min 90 and 115 ideally
18.5’ min 115 and 150 ideally
20-21’ min 175 and 200 ideally
23’ 225 min and 250 ideally or twin 150’s
25-26’ min 300 and ideally 350 or twin 200’s.

Edit: adding a pod with flotation adds one power level higher than “ideal.” There are always minor exceptions ie a heavy Grady could use one more than shown and a light tinny could be great with “min”
Print this up and put it on your refrigerator!

Give me a two-stroke with, half the hp, a tiller, pull start, on a riveted aluminum with ideally no passengers over 200lbs and we can send it! I think recent discussions of heavy batteries in boats is food for thought. A guy just caught a nice tyee in Bamfield in a tin boat with manual downriggers.

 

[RiverBoy]

Give me a two-stroke with, half the hp, a tiller, pull start, on a riveted aluminum with ideally no passengers over 200lbs and we can send it! I think recent discussions of heavy batteries in boats is food for thought. A guy just caught a nice tyee in Bamfield in a tin boat with manual downriggers.

i’m in. let’s all sell our oversized boats and go back to tinnys with 2 stroke power like our dads!

the way the world is going with the cost of gas and whatnot i think we may have to!

 

[brutus]

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.

www.facebook.com

 

[noluck]

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.

www.facebook.com

too bad it has a 4.2

 

[brutus]

too bad it has a 4.2

I knew the Cummins would get you perk up lol

 

[noluck]

I knew the Cummins would get you perk up lol

really a disgrace calling it a cummins

 

[kingblazer84]

Bei Facebook anmelden

Melde dich bei Facebook an, um dich mit deinen Freunden, deiner Familie und Personen, die du kennst, zu verbinden und Inhalte zu teilen.

www.facebook.com

 

[Gallivanter]

Give me a two-stroke with, half the hp, a tiller, pull start, on a riveted aluminum with ideally no passengers over 200lbs and we can send it! I think recent discussions of heavy batteries in boats is food for thought. A guy just caught a nice tyee in Bamfield in a tin boat with manual downriggers.

That’s how my Dad introduced me to the ocean world, 12’ Mirrocraft with a 1977 9.9 Evinrude with manual downrigger on one side and deep 6 on the other, so many Great memories! We Sent that tinner everywhere!

 

[Eden Island]

My grandfather had a 12' wooden clinker with a Seagull. Fussiest motor I ever saw, but we fished Lazo okay. Bamboo rod and a very old Peetz.

 

[MRWood]

My honest power length to horsie formula:

17’ min 90 and 115 ideally
18.5’ min 115 and 150 ideally
20-21’ min 175 and 200 ideally
23’ 225 min and 250 ideally or twin 150’s
25-26’ min 300 and ideally 350 or twin 200’s.

Edit: adding a pod with flotation adds one power level higher than “ideal.” There are always minor exceptions ie a heavy Grady could use one more than shown and a light tinny could be great with “min”
Print this up and put it on your refrigerator!

What would you put on a 19’ Seasport Skipper if podded?

 

[Stizzla]

2 hundy. Got trim tabs?

 

[Ringo]

2 hundy. Got trim tabs?

You already gave out your secret chart and now you're doing free online appraisals. How are you supposed to get back on a boat if you keep doing like this??