Wanted: Used 90-115 HP 4-Stroke
- Thread starter Dencope
- Start date
the fog ducker
Well-Known Member
Sotally Tober
Well-Known Member
Not mine, not an Etec either.
If you have the skills to replace the piston, its a cheap buy.
http://www.kijiji.ca/v-powerboat-mo...rk/1243983496?enableSearchNavigationFlag=true
If you have the skills to replace the piston, its a cheap buy.
http://www.kijiji.ca/v-powerboat-mo...rk/1243983496?enableSearchNavigationFlag=true
the fog ducker
Well-Known Member
Dencope
Active Member
Thanks for the heads up on the motor in Port, exactly what I'm looking for. Unfortunately I head back to work today and never got a chance to go have a look at it. Maybe it'll still be available in a couple weeks when I get off. Thanks again. @thefogducker thanks as well for the heads up on the 90 Merc, it was snatched up almost immediately.
the fog ducker
Well-Known Member
the fog ducker
Well-Known Member
Humpbubble
Active Member
100hp tiller !
kevind
Well-Known Member
the fog ducker
Well-Known Member
heard your takin me fishin soon , its on !!
gonna have ta blind fold ya for the ride out
fd
kevind
Well-Known Member
heard your takin me fishin soon , its on !!
gonna have ta blind fold ya for the ride out
fd
No way your driving the boat so the blind fold will have to stay in your pocket lol
Dencope
Active Member
Think I'm going to pull the trigger this week on the 115 E-Tec, went for a ride yesterday and it was as advertised. $8500, 330hours, controls and gauges. Any thoughts on the price or this motor? Also it's a 2014 with warranty til 2020. Thanks for any input just wanted a little peace of mind before I go drop the cash. Thanks in advance.
Damien
Well-Known Member
I think the price is fine. You could try to shave off $500 but how would you feel if you lose out on this motor going into prime season?
Here are some comparables at rock bottom USD pricing for reference;
http://www.boats.net/outboard_motor/Evinrude/115HP/B-E115DSL_.html
http://www.boats.net/outboard_motor/Evinrude/115HP/B-E115DSLAF.html
And a couple Yammies, for *****;
http://www.boats.net/outboard_motor/Yamaha/115HP/Y-F115LB-SD.html
http://www.boats.net/outboard_motor/Yamaha/115HP/Y-F115XA.html
Here are some comparables at rock bottom USD pricing for reference;
http://www.boats.net/outboard_motor/Evinrude/115HP/B-E115DSL_.html
http://www.boats.net/outboard_motor/Evinrude/115HP/B-E115DSLAF.html
And a couple Yammies, for *****;
http://www.boats.net/outboard_motor/Yamaha/115HP/Y-F115LB-SD.html
http://www.boats.net/outboard_motor/Yamaha/115HP/Y-F115XA.html
leftcoast
Well-Known Member
PM you dencope
willydw
Active Member
You will love that motor.
Dencope
Active Member
Hey, was just wondering what style transom was on your boat? Mine is cut out a little further on the port side to accommodate a kicker. Because of that the port trim tab would have to be drilled in a bad spot where the engine well meets the transom. Hard to explain. Was just wondering if yours were maybe electric? Don't think the hydraulic ones are going to work on here unfortunately.
Dencope
Active Member
Do you remember if you had to buy and external hydraulic line adapter for the port side as the transom stays low to accommodate kicker?
Dencope
Active Member
Purchased the 2014 115 E-Tec, very happy with it so far. I had some concern on the Evinrude warranty but it turns out to be no problem and very good actually. Had trouble trying to get P Y Marine in Port Alberni to transfer warranty (nothing mechanically) into my name but was not an issue doing it at South Island Marine in Sidney (would highly recommend over P Y for front desk personnel). The aft cowling latch was broken somehow from after the time I examined to the time it was mounted on my boat, no way to repair as it was a plastic piece that was broken and glue would not work. After one day of the warranty being in my name South Island Marine took photos and said it wouldn't hurt to send a claim in as a new cowling is $1500 to buy new. Low and behold it was approved they have it at their shop and I just need to bring my boat in to have it installed...brand new cowling ($50 deductible)! Works out well because the one that came with had a few scratches. Also once hooked to the computer there was only 250 hours not 350! Happy all and all and thank you all so much for your help in finding this motor. Now it's time to find a kicker!
