anybody with a bayliner 2350with bravo 3 leg

[robertg]

trying to track anyone out there with a bayliner 2350 with the bravo 3 leg and duo prop, 5.7 litre merc, just converting and wanted an idea of prop pitch and diameter. I have been on the merc site and have a good idea but somebody with this combo might have some suggestions

 

[Seagirt]

If you haven't already, you might want to search/ask on Bayliner owners forum. Lots of good info there.

http://www.baylinerownersclub.org/forum/

 

[Striker]

trying to track anyone out there with a bayliner 2350 with the bravo 3 leg and duo prop, 5.7 litre merc, just converting and wanted an idea of prop pitch and diameter. I have been on the merc site and have a good idea but somebody with this combo might have some suggestions

Hello

I have a 2459 with a Bravo III and 5.7L Merc. I use a 26 Pitch Prop set. Not sure of the diameter.

Joe

 

[robertg]

thanks Striker and Seagirt. I went on the Bayliner site could not find anything. but when I get more time I will dig a little deeper.

 

[TenMile]

Mercruiser has a "Prop Finder" tool you can use. https://www.mercurymarine.com/en/us/propellers/selector/#/step-one

FWIW: if you've not purchased the prop yet, rather than purchase the Mercruiser take a gander at the Hill Marine 4x4 blade props. I replaced the stock Mercruiser 3x3 prop with one of these and the performance of the boat was without exaggeration, remarkable! It was like I put a new engine in the thing. Hole shot went way up, fuel efficiency increased and my top end speed increased. http://www.hillmarine.net/Bravo-3-4-blade-propellers-p/tpl4ds-hpr4cs.htm -- they are cheaper than the Mercruiser units as well The guys there are very helpful and if you give them the weight of the boat, they will be able to recommend the right prop.