So I'm planning to put an ACR in my boat, it has a group 24 starting battery and group 27 house battery, my plan is to run a couple downriggers plus the usual house loads (stereo, lights etc) off the house battery. I have 2 bilge pumps, one is switched and the other is auto (float activated). My question is where should I wire the float actived pump to? I'm thinking it should be fed directly from the starting battery but then I got thinking the house battery is bigger; I don't think I want both pumps fed from the same battery. In any event, I'm set on direct wiring the auto pump (ie not fed thru any panel, that is what the switched pump will be fed from).
Looking for guidance on this as I don't want to have issues on this...
Thx
Zeke
Looking for guidance on this as I don't want to have issues on this...
Thx
Zeke