bigdogg1
Well-Known Member
Long story short...I have been cleaning out old wiring to my starter/house batteries, have had Blue Sea components (bars, Macr's, etc, added a better bilge pump and a wash down. Lots left to do but was nearing the end. Dry tested every connection prior to butt joints and shrink wrap as needed. Had one wire left to connect to bilge pump and had to leave so shut system down. Came back, connected wire and out of nowhere, my 9.9 started tilting as soon as I turned on the battery switch.
I cut the last wire I connected, tried the battery switch and the motor kept coming up.
So now I have disconnected power to the 9.9 while I resolve this. There has to be a short somewhere but what is dumbfounding is that I only attached the one wire prior to the gremlins and now it doesn't turn off.
No idea about where to look so any advice would be appreciated! Thanks in advance.
I cut the last wire I connected, tried the battery switch and the motor kept coming up.
So now I have disconnected power to the 9.9 while I resolve this. There has to be a short somewhere but what is dumbfounding is that I only attached the one wire prior to the gremlins and now it doesn't turn off.
No idea about where to look so any advice would be appreciated! Thanks in advance.