Not sure what other people's experience has been but every few years my pressure switch in my washdown pump seems to fail. i have a Shurflo blaster II and when i took it apart I noticed that the switch is only rated for 10 amps but i know the pump can draw a lot more than that. bizarre that they put such an underrated switch in there. Previous owner was plowing through them too so had an extra switch on board. I now wired a 40A relay to do the switching instead with the pressure switch as the actuator for it. Going to see if it lasts longer.
Anyone else had washdown pressure switch failures like that?
Anyone else had washdown pressure switch failures like that?