Two Lowrance, one transducer

[Soup Knot Sea]

Hey team, can anyone advise if I can connect two lowrance units together? I have a LCX-37 at the front of the boat, and I’d like to add a LCX-25 to the rear of the boat. Neither unit will be used with gps, both just used as depth sounder / fish finder. I have an Aimar p66 transducer, if it matters. On the back of the units there is a red port labelled “network”… could it be as simple as connecting them together with this network cable?

 

[Swiggy]

Yes just connect the Ethernet Ports (Yellow) with an Ethernet Cable and both units will run off the same transducer.

 

[Soup Knot Sea]

Yes just connect the Ethernet Ports (Yellow) with an Ethernet Cable and both units will run off the same transducer.

Thank you!

 

[wildthing]

yes but here is the catch them bloody cables are so darn well you'll find out
get one thats more than long enough 6'- 15' -25' -50' think are the made lenghts....
best bet is find a used one as you may need to sit down at HC

 

[Soup Knot Sea]

yes but here is the catch them bloody cables are so darn well you'll find out
get one thats more than long enough 6'- 15' -25' -50' think are the made lenghts....
best bet is find a used one as you may need to sit down at HC

Gotcha, thanks for the heads up…. Good thing everything else boat related is so reasonably priced.
‍