WITW, it is amazing what you can do with this stuff. Yesterday the wife dropped her Nextel phone in a bucket of water. I removed the battery and sprayed it down with CorrosionX. An hour later and Ta da, it works like a new one. Its a great water dispersal also while it Polar Bonds { + and - } to the metal. The FTFC { Fluid Thin Film Coating }Technology is amazing allowing you to cover a great are with little volume at .0003 of and inch. This is not solvent based and will not evaporate on you in seconds like some other products. I have been using a 6oz Aerosol can for all kinds of stuff. Suggested retail on the 6oz is $ 7.95 US and it will last. I would recommend the 16oz Trigger Spray bottle for $ 15.95 US and use a non absorbent towel to spread it on. After that you can do your Buffing or Polishing and then re apply to the surface to protect the finish you have created.Aparrently the Spray Bottle is easier to ship across the USA / Canadian Border. CorrosionX is also the best lubricant you can use for maritime applications. It does not attract dust, outperforms lubricants fortified with Teflon* (PTFE), and due to it's unique polar bonding technology, CorrosionX repels water, and doesn't dissipate quickly or wash off in harsh saltwater environments. Use CorrosionX on throttle cables, steering mechanisms, seat swivels, locks, travelers, winches, pulleys, furling systems, tracks and on any other gear that would benefit from lubrication. It will stop the Corrosion on contact. Due to its extraordinary dielectric properties, CorrosionX should be applied to all battery terminals, terminal strips, ignition switches, electrical connectors, circuit breakers, fuse holders, light switches, light sockets, electrical plugs, blower motors and fans to protect them from corrosion, extend their life and keep them working reliably. Best of all there is a 100% money back guarantee.