I thought I would give the members here first crack at this motor...before the Used Vic crowd. I just bought a super clean, low hour 2003 Yamaha high thrust/ power tilt, remote, extra long kicker that had a powerhead issue. This is the big block model which are hard to find now. It was traded in for a new kicker at a local shop. I have a perfect 2006 powerhead for it. I brought it home today and already have the old powerhead removed and have the 2006 all dressed with the bolt on parts from the 2003. All I need is a base gasket to drop the motor back on and will try and get that tomorrow. The motor I'm putting on has a new internal zinc, new head gasket, newer timing belt, new oil and filter, and I will pull the leg and throw a new water pump impeller in it as well. The head was removed just to check for carbon and any salt buildup in the head passages. If I get the base gasket tomorrow I should have it running tomorrow night. I should be ready to let it go by the weekend. I'll take pictures and a video of it running and post here. It comes with the remote control box and a wire harness. Unfortunately the shop cut the main harness from the box...I assume they were having a hard time fishing the big connector end threw the boat to remove it. Easy fix though. There are also a couple of control cables, not sure what length. $2200.00 will take it. BTW I took the head off the 2003 powerhead and it was just a stuck and bent valve which also broke the spring. Seen this before and about a $200 fix for the parts and machine shop time. Which means I will still end up with an extra good powerhead once the valve is fixed. I guess I'm still looking for another non running outboard to make another good one. Maybe I just landed into a new side business without knowing it!!!