CIVANO
Well-Known Member
This is expensive but rated tor wet locations and direct burial. I used them on my boat trailer years ago and no problems. You wire nut or splice then combine the 2 part epoxy by pushing a disc inside the tube then shaking until combined. Then shove the connections in the tube - deep into the epoxy. it hardens quickly and is rock hard.
http://www.cesco.com/b2c/product/10...F0BEvwg-WJpd6immw1EFRcNB5CfNrUvSJjBoCNrPw_wcB
http://www.cesco.com/b2c/product/10...F0BEvwg-WJpd6immw1EFRcNB5CfNrUvSJjBoCNrPw_wcB