DFO plans to finish off Steelhead in the Fraser. Check this out.

OldBlackDog

Well-Known Member



Steelhead Voices
3 hrs ·
If yesterday's news about the status of those endangered Thompson and Chilcotin steelhead wasn't enough to catch the attention of the recreational fishing and conservation communities, Today's announcements by DFO are even better. As of 2:00 PM DFO has announced set net and drift net fisheries for what looks to be every First Nation between Tsawwassen and Hope to target chum salmon at one time or another over the next 3 days. These authorizations come on the heels of a 24 hr old post, also by DFO, indicating there is virtually no chance its minimum escapement target for Fraser River chums will be met. Square that!

Needless to say, there is no reference to steelhead in these announced openings. The best we can do is to search out other web sites and discover a recommendation that steelhead should be released unharmed. That happens all the time with overnight gill net sets I'm sure.

Welcome to reconciliation and DFO's new approach to conservation. All this to target enhanced chum salmon, principally for their roe. Mind you, there are pre-fishery ads for chum salmon already on Face Book.
 
I'm writing scratch that calling Wilkinson's office tommorow and ask how this circle is squared. So sad the fox is definitely minding the hen house now
 
An absolute joke what has happened over the last decade to the strongest lb for lb steelhead on the west coast.
These steelhead are now basically extinct. We should be having a few guys go and capture what is left and brood these fish and at least start some sort of hatchery program. Or do we just let them become a distant memory.
This latest opening for netting will see at least a dozen steelhead get caught if not more. And just like the male chum, Chinook any other species besides female chum they will just be thrown back dead in the water.

Take away the overseas roe and sturgeon bait market fishery these fisheries will have no buyers.
At 50$ a female and up to 25$ a lb for chum for can’t really blame these FN for doing something that DFO has allowed them to do. The blame should be be 100% on DFO.

Just like almost all of our fisheries in BC, DFO is continuing to manage to extinction.
Everybody should be making a call Wilkinson as well as our region 2 manager and ask how these openings can be justified on a year with the lowest return for chum on record.
https://www-ops2.pac.dfo-mpo.gc.ca/fraserriver/firstnations/HTMLs/CommunalOpeningTimes.html
 
So how clear does it have to be that the Government’s and I mean federal and provincial really do not give **** about fish.

Let’s be clear the Province was responsible for Steelhead and you can see how they fought for them.

This is in your face, a screw you and your opinions, we are going to do what we want and if it kills off runs of fish, so what.

Like it or not just wait till they apply this power to MPA’s and hatchery programs.

Sad.
 
O they give a ****....about reconciliation. Then when they are done killing all the fish sue Canada for compensation because there is no fish....and the taxes go up.......Canada you voted for it.
 
And this little story explains why DFO won't get off the track it is on when it comes to Steelhead.......as you read it, insert in DFO and in-river gill net fisheries....you'll get it.

Railroad Tracks
The Canadian and U.S. Standard railroad gauge (distance between the rails) is 4 feet, 8.5 inches.
That's an exceedingly odd number.
Why was that gauge used?
Because that's the way they built them in England, and English expatriates designed the U.S. Railroads.
Why did the English build them like that?
Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they used.
Why did 'they' use that gauge then?
Because the people who built the tramways used the same jigs and tools that they had used for building wagons, which used that wheel spacing.
Why did the wagons have that particular odd wheel spacing?
Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England, because that's the spacing of the wheel ruts.
So, who built those old rutted roads?
Imperial Rome built the first long distance roads in Europe (including England) for their legions. Those roads have been used ever since.
And the ruts in the roads?
Roman war chariots formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels.
Since the chariots were made for Imperial Rome, they were all alike in the matter of wheel spacing.
Therefore, the United States and Canadian standard railroad gauge of 4 feet, 8.5 inches is derived from the original specifications for an Imperial Roman war chariot.
In other words, bureaucracies live forever.
So the next time you are handed a specification, procedure, or process, and wonder, 'What horse's butt came up with this?', you may be exactly right.
Imperial Roman army chariots were made just wide enough to accommodate the rear ends of two war horses.
Now, the twist to the story:
When you've seen a Space Shuttle sitting on its launch pad, you may have noticed that there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRBs. The SRBs are made by Thiokol at their factory in Utah.
The engineers who designed the SRBs would have preferred to make them a bit larger, but the SRBs had to be shipped by train from the factory to the launch site.
The railroad line from the factory happens to run through a tunnel in the mountains and the SRBs had to fit through that tunnel. The tunnel is slightly wider than the railroad track, and the railroad track, as you now know, is about as wide as two horses' behinds.
So, a major Space Shuttle design feature of what is arguably the world's most advanced transportation system was determined over two thousand years ago by the width of a horse's butt. And you thought being a horse's butt wasn't important! Now you know, Horses' Asses control almost everything.
 
November 7, 2019
To: Distribution
Re: Status Update for Fraser River Late-Run Summer Steelhead
Catches to date of steelhead in test fisheries suggest that Fraser River late-run summer
steelhead stocks are at extremely low levels of abundance and in a state of Extreme
Conservation Concern.
There is presently a 96% chance that the status will be classified as an Extreme
Conservation. Conservation classifications are described in the Provincial Framework for
Steelhead Management in BC (2016) and supporting technical documents.
Fraser River late-run summer steelhead is a group of stocks comprised of 10 spatially
discrete spawning stocks distributed in the Fraser watershed upstream of Hell’s Gate.
The aggregate commonly referred to as “Thompson and Chilcotin Steelhead” comprises 7
out of these 10 spawning stocks. The current spawning population forecast for the
Thompson watershed is 104 and the current spawning population forecast for the
Chilcotin watershed is 48. The forecast for the Thompson represents the lowest
observed over a 43-year monitoring time frame. The forecast for the Chilcotin represents
the lowest over a 49-year monitoring time frame.
The aggregate run of Thompson, Chilcotin and other Fraser River, late-run, summer
steelhead stocks occurs over about a 12 week period and normally peaks in the Johnston
Straits and in Juan de Fuca Strait in late September. In the lower Fraser test fishing area
near Fort Langley, the run normally begins in late August and continues into the latter
half of November, peaking around October 10. Further updates will be provided as the
season progresses.
Robert Bison
Fisheries Stock Assessment Biologist
Fish & Wildlife Branch
For your information, the following data are attached:
List of Figures:
Figure 1. The estimated spawning abundances of Thompson River steelhead in relation
to conservation reference points. The last data point illustrates the expected spawner
abundance for this season’s return which will spawn in the spring of 2020.
Figure 2. The estimated spawning abundances of Chilcotin River steelhead in relation to
conservation reference points. The last data point illustrates the expected spawner
abundance for this season’s return which will spawn in the spring of 2020.
Figure 3. Observed catches of steelhead in the Albion chum and chinook test fisheries to
date, illustrated by the diamonds and squares, respectively. The lines illustrate the
“average” pattern expected for the balance of the season, given the observed catches to
date, the historical data on run timing and the historical data on the steelhead catching
efficiency of the two gillnets.
 
Back
Top