How to? Build a big smoker?

Want to buy mine? It's pretty big. Like fridge big. Plywood construction lined with stainless. Propane burner for heat. 12 oven racks inside.
 
You not using it?
Not really. It was at my shop and then moved it to my house but now my wife wants it gone. It's great for big loads I just don't smoke as much as I used to something smaller would be fine.
 
The racks and the stainless alone is worth a few hundred bucks. You could even build a new carcass for it if you wanted. I got my use out of it over the past 5 years.
 
this is the new one a old double doored SS freezer
46891815_2009448375810738_4069584716729155584_n.jpg
46768413_2009448402477402_7341279997237133312_n.jpg
 
this is the new one a old double doored SS freezer
46891815_2009448375810738_4069584716729155584_n.jpg

What's going on behind the plywood below the T in the chimney? Is yours stove for heat and a second smoke source? I have a setup the same style but my stack just goes straight from the stove to the box
 
Hi yes thats a propane burner for heating the smoker so say for pepperoni i put heat on for about 3 or 4 hours at 135 to 145 ish then turn off and then 6 feet to the left is the wood stove that i cut chunks of alder into kindling pieces for the smoke, you never want to go past the 160 mark when doing meats etc as the fat will melt and you have created sawdust .
when all is done you want to get the meat product past the food safe temp of 140 they say 153 for 10 seconds...
 
Hi yes thats a propane burner for heating the smoker so say for pepperoni i put heat on for about 3 or 4 hours at 135 to 145 ish then turn off and then 6 feet to the left is the wood stove that i cut chunks of alder into kindling pieces for the smoke, you never want to go past the 160 mark when doing meats etc as the fat will melt and you have created sawdust should check www.besttoasterovenguides.com
when all is done you want to get the meat product past the food safe temp of 140 they say 153 for 10 seconds...
Want to buy mine? It's pretty big. Like fridge big. Plywood construction lined with stainless. Propane burner for heat. 12 oven racks inside.


Can we make it by ourselves? Does it's require much energy and time?
 
Back
Top