Kellahan Warrior 20

dkdivot28

New Member
I have one and am working on fuel tank pickup.
I took threaded nipple off but no tube. It fits at rear on starboard side.
Anyone had any experience?

thx
Doug
Parksville
 
Do not know the boat, but if you are certain that it is the pickup you have taken out, you can measure down to the bottom of the tank and just install a new one. If it is not screwed in, it is probably silver soldered or sil fossed in place.
 
As mentioned already, are you certain it is the pickup you removed? The vent hose fitting often looks similiar.
 
Do not know the boat, but if you are certain that it is the pickup you have taken out, you can measure down to the bottom of the tank and just install a new one. If it is not screwed in, it is probably silver soldered or sil fossed in place.
x2
 
Back
Top