Product Recommendation for these three small fiberglass repairs

[seabeyond]

Hey Guys.
Figure this is the place to ask for suggestions for a good product to use for three small patch jobs on the boat.
Ding locations:
- Outside corner on the starboard stern
- Deadrise ding (looks like a trailer bite)
- random ding by a cleat

I'm not a fiberglass guy so ease of application is important. I'm not looking for it to look like the chips never happened, just seal them up and look better than they currently do. I don't think these are shop worthy either. What's the recommendation for a product I can patch these up with? All above waterline although one is only an inch up.
Thanks!

 

[bigdogg1]

Marine-Tex

MARINE-TEX® EPOXY PUTTY - ITW Performance Polymers

MARINE-TEX® EPOXY PUTTY barrier coat seals and pGluvit barrier coat seals and protects hulls and decks.rotects hulls and decks.

itwperformancepolymers.com

 

[Aces]

Polyester putty

 

[RiverBoy]

Marine-Tex

MARINE-TEX® EPOXY PUTTY - ITW Performance Polymers

MARINE-TEX® EPOXY PUTTY barrier coat seals and pGluvit barrier coat seals and protects hulls and decks.rotects hulls and decks.

itwperformancepolymers.com

this stuff. it’s expensive for how much you get but well worth it. i had a nasty ding on my old boat right down to the fibreglass. mix up enough to do an initial fill, allow to dry then sand. make up another smaller batch to do a second coat, sand dry and your done.

 

[Maxpri]

Kidnap Ron from @Sttr

 

[seabeyond]

Thank you gentlemen. Should have the putty in hand for a weekend touchup.