Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Podded 20ft Double Eagle

  1. #1
    Senior Member Peterman's Avatar
    Join Date
    Apr 2011
    Location
    Nanaimo BC
    Posts
    378

    Podded 20ft Double Eagle

    With the addition of the new welded boat Im selling my 20ft podded Double Eagle

    LOA 22.8ft
    1980 Hull
    $3,400 for the boat (o.b.o.)

    No Power
    Aluminum Pod
    Rocket lauchers/Radar perch
    Hydraulic steering with new lines and lines for secondary steering
    Bennett Trim Tabs
    New fuel filter
    Battery Switch
    Bilge Pump
    Search light

    Few other things

    Bought this boat from Brad at Seabeam a few years ago, cleaned it up a bit...
    All the electrical works, but someone would want to reorganize while its opened up

    Trailer would be $1000.00 It needs another $1500 put into it in my opinion... So I willing to keep it... probably better to find a good used one if you plan to trailer a lot...

    I did a lot of work to clean it up, it would suite someone who has a little more experience than i do, and time...
    There's some older posts on here of some of the work that was done...
    Attached Images Attached Images      
    DoverBay Lawn and Garden

  2. #2
    Senior Member Peterman's Avatar
    Join Date
    Apr 2011
    Location
    Nanaimo BC
    Posts
    378
    Here's some Pics from last summer
    Attached Images Attached Images      
    DoverBay Lawn and Garden

  3. #3
    Senior Member
    Join Date
    Feb 2012
    Posts
    111
    Dam nice looking boat Peterman, I was looking earlier at yours, now I have the 18.6 DE. At the price your asking it should go quick. Makes me wish I had a Dodge and not my monster Toy.

    HM

  4. #4
    Senior Member kelly's Avatar
    Join Date
    Jun 2004
    Location
    Canada.
    Posts
    3,680
    I might have someone interested I'll send this to him.

  5. #5
    Senior Member Peterman's Avatar
    Join Date
    Apr 2011
    Location
    Nanaimo BC
    Posts
    378
    Im going to throw it on craigslist soon, wife cant beleive Ive got three 3 boats and paying covered storage on 2 of them... she might be right for once...
    Like i say, it needs a few things still, i just dont have the time or the space, rather sell it cheaper to someone...
    DoverBay Lawn and Garden

  6. #6
    Senior Member
    Join Date
    Sep 2010
    Location
    Canada.
    Posts
    1,108
    Hey Peterman,

    I have a couple questions.

    What shaft length motor does it need, 25" or 30"?
    What size is the fuel tank?
    Also, do you know the dry weight of the hull as it is?

    I have a trailer but it's only single axle 3500lbs max.

  7. #7
    Senior Member Peterman's Avatar
    Join Date
    Apr 2011
    Location
    Nanaimo BC
    Posts
    378
    I was running a 25"
    Has 2 rectangular Fuel Tanks not sure the size... Saddle tanks by the forward seats
    Might be a bit heavier than 3500lbs by the time its loaded and has motors on it... but im not sure the weight..
    DoverBay Lawn and Garden

  8. #8
    Senior Member Peterman's Avatar
    Join Date
    Apr 2011
    Location
    Nanaimo BC
    Posts
    378
    Quote Originally Posted by Peterman View Post
    With the addition of the new welded boat Im selling my 20ft podded Double Eagle

    LOA 22.8ft
    1980 Hull
    $3,400 for the boat (o.b.o.)

    No Power
    Aluminum Pod
    Rocket lauchers/Radar perch
    Hydraulic steering with new lines and lines for secondary steering
    Bennett Trim Tabs
    New fuel filter
    Battery Switch
    Bilge Pump
    Search light

    Few other things

    Bought this boat from Brad at Seabeam a few years ago, cleaned it up a bit...
    All the electrical works, but someone would want to reorganize while its opened up

    Trailer would be $1000.00 It needs another $1500 put into it in my opinion... So I willing to keep it... probably better to find a good used one if you plan to trailer a lot...

    I did a lot of work to clean it up, it would suite someone who has a little more experience than i do, and time...
    There's some older posts on here of some of the work that was done...
    Craigslist Link

    http://nanaimo.en.craigslist/boa/2994267183.html
    DoverBay Lawn and Garden

  9. #9
    Senior Member finaddict's Avatar
    Join Date
    Oct 2001
    Location
    Port Moody
    Posts
    1,246
    I have a friend who may be interested. When the work was done, was there any attention to the transom and stingers?

    Thanks



  10. #10
    Senior Member Peterman's Avatar
    Join Date
    Apr 2011
    Location
    Nanaimo BC
    Posts
    378
    I didnt do the major work... Brad at Seabeam did it all...I basically cleaned it up and put some money into the trailer.. Painted and secondary steering...stuff like that..... He said no dry rot, doesnt seem spongy at all... but its still an older boat... Had a guy last month look at it and survey it... said good hull but could put a lot of time into it, if your trying to make it perfect... Cuddy etc... no cushions to sleep on... Its a fish boat not a cruiser...
    DoverBay Lawn and Garden

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •