Bass fishing with topwater wood plugs is a fascinating experience every angler should try. It's an addictive kind of angling. The excitement and explosiveness of the surface strike can unnerve even the most experienced angler and turns every trip into a memorable one. Bass first become vulnerable to surface lures when the water warms up in the spring. These fish are a warm water species and are cold blooded, so their activity level rises proportional to water temperature increases. As water nears 60 degrees, bass, both largemouth and smallmouth, move into shallow bays and pockets looking for food and readying themselves for spawning.

Although these time periods are considered "best", fish can be taken throughout the day on surface lures. Circumstances such as the amount of light, wind chop and cloud cover each play a part in terms of fish activity levels and feeding patterns, on any given day.

Bass are especially susceptible to wood surface baits in the fall when they stay in warmer, shallower water for long periods of time. They seem to know that winter is on the way and increase their feeding activity as they sense the coming cold. This is when surface lures are at their best.

Accurate casting is essential if you wish to catch many bass. Mere inches can mean the difference between a fish and none. Casts should be made to openings in or near cover such as underneath or alongside a dock, inches away from a stickup, between lily pads, over submerged objects which lie just under the surface, etc.

Bass feed on large organisms such as crayfish, minnows, salamanders or frogs. Any small animal or bug that lands near a bass in ambush is a likely meal and this is what makes surface lures so deadly...they imitate these easy meals.

Bass are savage and aggressive eaters and, whether it's a plug fished just under the surface or on top, you'll have no doubt about the strike.

On calm days, smaller plugs with less noise-making capabilities work better, while you need a real noisy plug to create disturbance on windy days.

In clear water, color is more important because the fish strike by sight. In murky water, bass usually will react to vibrations, so noisier plugs work better.

Sometimes a bass from a long ways off, will take off submarining just under the surface toward the bait, and many times you will see the wake coming. If you can keep the plug working without panicking, you are in for some unbelievable strikes!

At this time it is important to mention that you NEVER want to "set the hook" when a fish busts your surface plug. If you've already experienced this, you've probably found your hook-up-to-strike ratio very low. Wait until you FEEL the weight of the fish on your rod before you set. If you don't wait for that "weight", more than likely you're the one going to get hooked.

Sometimes bass blast a bait, only to hit it with their tail to kill it and then pounce on it again to eat it. The angler with the nerve to keep that bait in the area and not set the hook until the bass can be felt will be rewarded.

Sharp hooks are critical in all fishing situations. Hooks on plugs must be super sharp to ensure their effectiveness. Small files have proved to be the absolute best sharpening tools for fish hooks and the Sharp Hook File produces needle-sharp points in seconds. Place the file parallel to the hook point and, with gentle one-way strokes, remove a small amount of metal from at least two sides of the point, resulting in both a needle-sharp point and knife-like cutting edge.

Topwater wood lures can be divided into several categories including surface chuggers/darters, poppers, jerk baits/walkin' baits and propeller baits. Here are some proven techniques for fishing each type:

Surface Chuggers/Darters
Two basic options for fishing wood surface chuggers/darters such as the Bass-Oreno® which darts underwater when twitched and then floats back to the top are:

Option 1:
For fishing near deep dropoffs and points, the Bass-Oreno® can be used either as a darter or sub-surface wobbling bait. A unique feature of this lure is its ability, after being twitched under the surface, to pop back to almost its original starting position. To fish as a darter, use a sharp jerk which causes the bait to splash and pop water on the surface before darting under. Then pause, allowing the bait to resurface. Jerk again, pause and repeat. A Bass-Oreno® can be used at any point during this pattern as a sub-surface, side-to-side wobbling bait simply by using a steady retrieve. Many anglers prefer to fish the plug with the sharp jerk-pause pattern for several feet, switch to a straight sub-surface retrieve for the next several feet and then allow the bait to resurface and start the process over again.

Option 2:
Use a twitch-and-pause pattern when fishing shorelines or water adjacent to cover. Work it all the way to the boat, keeping your eyes open for a boil adjacent to the boat. If one is observed, lengthen the pause time between twitches on the next cast.

Option 1:
Cast to the edge of cover and let the impact rings move about three feet away from the lure. Twitch once, stop, twitch again, stop. Make a short, sharp jerk, stop, jerk, stop and continue this pattern until the plug is only a few feet away from you. As you lift the lure out of the water, watch carefully around it. If a boil appears, slow down the retrieve on your next cast as you have been moving the lure too fast to achieve a strike.

Option 2:
Cast to the edge of cover. Make two quick jerks, stop and then continue this pattern until the plug is a few feet from you. Follow the lift-out procedure above.

Option 3:
Cast to the edge of cover. Wait for one full minute. Twitch the plug twice, stop, jerk once, stop, twitch twice, etc. Use this alternating pattern until the bait is a few feet from you. Follow lift-out procedure above.


Walkin'/Jerk Baits Walkin'/Jerk Baits such as the Woodwalker, Dalton Special ® and Jerk'n Sam can be fished with four basic options:

Option 1:
For fishing through thin grass, use a sharp-jerk, short-pause pattern. With your rod tip down, jerk the bait sharply, causing the sharp, wide-bend hooks to cut cleanly through the grass. Stop the bait in openings in the grass and twitch it until more grass is encountered. Then, go back to the sharp-jerk, short-pause pattern all the way to the boat.

Option 2:
Near cover or off a shoreline, the prime strike zone is from the cover out about 10 feet. Cast to the edge and "dead-stick" the plug allowing the impact rings to move about three feet away. Twitch twice, stop, jerk, stop, repeat. If a boil appears in the area when you lift the bait out of the water, you are fishing too fast...slow down next cast.

Option 3:
"Dead-stick" the bait by allowing the impact rings to disappear before moving the bait. Jerk two quick times, allow impact rings to disappear, repeat.

Option 4:
"Walking the Dog" — This technique is accomplished by a steady reeling motion during which time you constantly twitch your rod tip. Many anglers prefer to use a downward rod stroke to force the plug to "walk" from side to side. The Woodwalker, Jerk'n Sam and Dalton Special® are all good "walkers".

SOME OTHER TIPS
Just because you don't get a strike on the first cast into an area does not mean there is not a fish there. The lure may have missed its mark by a few inches or you may have to aggravate a fussy bass into hitting. Repeated casts (four or five) to the same area are needed, with a little different position on each, to cover an area thoroughly before moving on.

- We all tend to work surface lures too fast. Slow down and give the fish a chance to "read the menu". Remember, the prime strike zone is the first ten feet off cover or the shoreline and, in shallow water flats, all the way to the boat.

- In cool weather, fish either very slow or very fast. In warm weather, fish "dead-stick'n" to fast. Sometimes bass will be quite aggressive, while other times you must tease them into striking.

- Slow-moving and apparently crippled lures will draw the majority of strikes from bass on the surface. However, there is a method known as "buzzing" that often will produce savage strikes when the regular topwater pause-and-twitch methods are not successful. "Buzzing" consists of casting beyond cover and then fast-retrieving the lure on the surface — past or through the cover, all the way to the boat.

- Buzzing can be done with a topwater propeller bait such as the Nip-I-Diddee® or Fishstick. All that's required is a fast retrieve to make the propellers buzz across the surface, creating the impression of an animal that's trying to get away fast.

SPECIAL NOTE
All of the wood topwater lures mentioned in this report are handmade one at a time by Luhr Jensen & Sons which is home to such legendary wood baits as the Bass-Oreno®, Nip-I-Diddee® and Dalton Special® as well as the Sam Griffin-designed Jerk'n Sam, Wobble Pop and P.J. Pop. It is our desire to produce the absolute finest topwater wood plugs on the market today.

Topwater fishing for bass is an exciting, rewarding and challenging sport that will provide you with many memorable fishing trips. The explosion of a bass after a surface lure has to be experienced to be believed. We invite you to try it soon...the bass are out there waiting!